New 4105 Compact Utility Tractor

The 4105 Tractor is available only with a two-range hydrostatic transmission (HST) that is incorporated in a die-cast aluminum transmission case.

• Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement

Integrated hydrostatic pump and motor

• Sauer-Danfoss® provides the integrated pump and motor; this ensures the components are matched to each other, providing maximum efficiency
• Reduces powertrain shock loads
• Provides strength and durability needed for operating such attachments as loaders

Transmission reservoir fluid checkpoint

Twin Touch foot pedals

• One reservoir (with one check point and one fill point) for the transmission, differential, and hydraulic system fluid speeds up daily maintenance.
• Mechanically actuated by Twin Touch^TM foot pedals allow selecting both directions of travel and speed with the touch of a toe.
• Foot-actuated differential lock is also included as base equipment to assist traction in tough spots.

Sauer-Danfoss is a U.S.-registered trademark of Sauer-Danfoss, Inc.

iMatch Quick-Hitch

iMatch Quick-Hitch with rotary cutter hookup

iMatch Quick-Hitch (LVB25976)

iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASABE Category 1 Standard S278.6 for quick-attach hitches.

• All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

• Upper bushing
  • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
  • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
• Lower bushings
  • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
  • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)

Semi-flat operator's station

All 4105 Tractors have a clear, semi-flat operator's station with controls in ergonomically friendly locations that allow for all-day work with little to no fatigue.

All tractors come with a high-back seat that offers good back support for comfortable operation. Adjustable both fore and aft, the seat flips forward for protection from the elements. The retractable seat belts are in base equipment.

Operator presence system:

• If the operator leaves the seat when the tractor is in gear, the engine shuts down.
• If the operator leaves the seat when the power take-off (PTO) is engaged, the engine shuts down.

A canopy is available to help protect the operator from the elements.

Left-side step

The left-side step allows for easy access on and off the tractor. The foot platform has a non-skid surface for safe, sure footing.

Grab handle and cupholder

Grab handles are located on both rear fenders to make it easy for the operator to get on and off the tractor. A cup holder is located on the right rear fender for convenience.

ROPS (with operator's manual holder)

The 2-post Roll-Gard™ rollover protective structure (ROPS) is in base equipment to protect the operator in the event of a tractor rollover. A plastic operator's manual storage canister is located on the ROPS and can easily be accessed from the seat.

Yanmar 3-cylinder, TNV series diesel engine

Full access to engine

The 1.5L displacement, liquid-cooled TNV Series Yanmar® diesel engine provides 32.5 horsepower and high levels of torque reserve to handle tough jobs. All Yanmar TNV series engines feature lower levels of exhaust emissions and reduced noise levels. The engines meet all current EPA requirements for Interim Tier 4 emission standards.

* As per 97/68/EC ISO @ rated speed.

Key features of the engine are:

Dry-type air cleaner

• Dry-type air cleaner with safety element  
  • Dual element design for added engine protection
  • Easy to service
• Hood can be easily opened without tools for full access to the engine
• Horizontal exhaust
  • Discharges fumes away from the operator and reduces noise from engine
  • Improves operator visibility
  • Optional vertical exhaust kit is available

Yanmar is a U.S.-registered trademark of Yanmar Company Limited.