New 9700 Self-Propelled Forage Harvester

Specifications

Maximum power	At 1400 rpm (ECE R120): 607 kW 825 PS / 813 hp Rated power: 588 kW 800 PS / 789 hp
Engine	Type JD18 X Exhaust emission regulations compliancy: Final Tier 4 (FT4)/Stage V Displacement 18.0 L 1098.43 cu in. Model Europe: 6180ZX501 North America: 6180ZX401 Cylinders In-line six
Fuel system	Common rail plus four valves
Fuel tank capacity	1,500 L 396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)	No DEF tank
Rated Power

Maximum power	At 1400 rpm (ECE R120): 607 kW 825 PS / 813 hp Rated Power: 588 kW 800 PS / 789 hp
Fuel tank capacity	1500 L 396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level)	No DEF tank
Rated Power

Type	JD18 X Exhaust emission regulations compliancy: Final Tier 4 (FT4)/Stage V
Model	Europe: 6180ZX501 North America: 6180ZX401
Displacement	18.0 L 1098.43 cu in.
Cylinders	In-line six
Fuel system	Common rail plus four valves
Air compressor	Optional
Engine/ground speed management
Manufacturer
Speed on road

Cooling fan drive	Direct
Cooling system capacity

Ground drive	ProDrive™ system, autoshift transmission, differential lock (automatic and manual), automatic wet brake system Engine rpm on road: 1200-1800 rpm
Hydraulics	Load sensing
Main clutch	Dry clutch
Number of discs	Two discs
Main driveband	Reinforced with Kevlar® inserts
Belt tensioning	Active, hydraulic pressure
Main driveband, polybelt belts	Eight grooves
Crop flow components
Crop harvesting unit

Type/voltage	12 / 24 V
Batteries/battery quantity/capacity	3 x 174 amp-hr
Alternator	12 V - 200 amp 24 V - 140 amp
Hydraulic system capacity	50 L 13.2 U.S. gal.

Differential lock	Manual and automatic
Maximum transport speed	ProDrive system: 20/25/30/40 km/h 12.4/15.5/18.6/24.9 mph
Rear axle type	Hydromechanical 4WD
Automatic wet brake system	Standard
Engine speed management	Standard
Type

Tilt and extend steering column	Standard
Air conditioning and heater	Standard: ClimaTrak™ control
Cool box	Optional
Trainee seat	Standard
Hectare counter	Standard
Operator information system	Cornerpost display
CAN bus electronics	Standard
Operator's seat	Standard: Air-suspension seat
Panoramic view windows	Standard
Side window wiper	Rear and side window wiper optional Parallel-type windscreen wiper
Electric adjust and heated	Optional on rearview mirrors
Rearview mirrors	Standard
Hand wash tank capacity

Yield monitoring	Harvest Monitor™ optional
Documentation	Harvest Doc™ optional
Crop analysis	HarvestLab™ 3000 optional
Length-of-cut control based on crop parameter	Standard: Infinitely variable length-of-cut (IVLOC™) Optional: AutoLoc™ system - use with HarvestLab
Assisted steering systems	Optional: AutoTrac™, Manual RowSense™, AutoTrac RowSense, Machine Sync

Width	Wide body channel
Crop flow components	Low-friction crop flow concept

Infinitely variable header drive	Standard
Lateral pivoting frame	Standard
Multicoupler	Standard
Auto PTO coupler	Optional
Header drive	Base: Heavy-duty gearbox (i=3.75); pump/motor displacement: 85/80 cc Optional: Extra heavy-duty gearbox (i=4.31); pump/motor displacement: 110/90 cc
Header height control	Advanced header control (AHC) optional
Grass pickups (transport width)	3, 4, 4.5 m 9.8, 13.1, 14.8 ft
Maize headers	8, 10 or 12 rows Working width: 6, 7.5, or 9 m 19.7, 24.6 , or 29.5 ft
Driveline
Header connection

Feed roll frame opening	Swing away, 37-45 degree (angle)
Number	Four
Metal detector	Standard
Stone detector	Optional
Width, front	830 mm 32.7 in.
Standard feedroll drive	Hydro feedroll drive IVLOC Infinitely header drive speed
Optional feedroll drive

Type	Dura-Drum™ cutterhead
Knife drum width	850 mm 33.5 in.
Knife drum diameter	670 mm 26.4 in.
Speed at rated engine speed	Standard - 1170 rpm Optional - 1350 rpm
Knife types available (crop)	Straight - grass Curved - corn
Shear bar options	Grass, corn, Dura Line™ corn, Dura Line Plus
Cutterhead housing width
Number of knives
Shear bar adjust
Shear bar, reversible

Reverse rotation	Yes
Automatic from cab	Yes, remote from cab
Sharpening modes	Grinding and finishing
Reverse drive
Reverse speed

Type	John Deere Premium KP™, John Deere XStream KP™
Quick-change	Quick kernel processor - swing in/swing out
Quick KP removal	Optional crane with remote-controlled electric hoist

Housing	Standard KP housing
Lubrication	Grease
Roll diameter	240 mm 9.45 in.
Maize - standard sawtooth or Dura Line™ roll teeth number (speed differential)	118 (32 or 40 percent)
Whole crop - standard sawtooth roll teeth number (speed differential)	178 (32 or 40 percent)
Weight	163.3 kg 360 lb
Available KP rolls
Sorghum, roll teeth number (speed differential)
Speed differential / Roll speed (lower)

Housing	Heavy-duty KP housing
Lubrication	Pressurized oil
Roll diameter	250 mm 9.8 in.
Maize - Dura Line sawtooth or XCut roll teeth number (speed differential)	110/145 (50 percent)
Whole crop - Dura Line XCut roll teeth number (speed differential)	145/165 (50 percent)
Available KP rolls
Bearing temperature monitoring system
Sorghum, roll teeth number (speed differential)
Speed differential / Roll speed (lower)
Weight

Rotor diameter/housing width	560 / 620 mm 22.86 / 24.41 in.
Number of blades	10
Speed (option)	1890 rpm

Rotation, degrees	210 degree (angle)
Hydraulic height position	Standard: Hydraulic raise and lower Optional: Automatic spout positioning
Double-cap deflection	Standard
Reach from center line (Optional)	6 or 8 row: 4.73 m 15.5 ft 10 row: 5.87 m 19.3 ft 12 row: 6.71 m 22 ft
Working height (maximum)	Height to spout: 6.6 m 21.65 ft
Number of wear liners

Rotary radiator screen cleaner	Standard
Automatic lubrication system	Standard: AutoLube
Engine oil and filter change duration	1000 hours

Transport length (without header)	6.6 m 21.7 ft
Transport width (without header)	3.2-3.8 m 10.5-12.5 ft
Transport height (to cab roof)	Below 4 m 13.12 ft
Approximate weight (without header)
With front tires
With rear tires
Working height (maximum)

Diameter of disks
Number of disks (top/bottom)
Weight

Maize, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
Wholecrop, roll teeth number (speed differential)