New 1835 Air Hoe Drill

Air Hoe Drills

Key Features

More Info

Compare >>>

Select up to 2 models to compare specifications

John Deere1835 Air Hoe Drill

Add Model

Key Specs

Dimensions

Road clearance with sweep	40.6 cm 16 in.
Transport width	3-section model: 6.2, 12.5 m 20.3, 41 ft 5-section model: 6.2, 6.25, 15.2, 18.6 m 20.3, 20.5, 50, 61 ft
Nominal mainframe width (between wing-fold pivots)	4.19 m 13.75 ft
Number of seed openers	Openers link
Spacing and width #1	Working width 12.2 m 40 ft Transport height without harrow 5.57 m 18.27 ft Minimum temporary height reduction with sweeps 508 mm 20 in. Weight With typical options: 13,154 kg 29,000 lb Spacing: 25.4 cm 10 in. Width: 12.5 m 41 ft
Spacing and width #2	Working width 15.2 m 50 ft Transport height without harrow 4.8 m 15.75 ft Minimum temporary height reduction with sweeps 508 mm 20 in. Nominal inner wing width (between wing-fold pivots) 3.08 m 10.1 ft Weight With typical options: 17,044 kg 37,575 lb Spacing: 25.4 cm 10 in. Width: 15.2 m 50 ft
Spacing and width #3	Working width 18.3 m 60 ft Transport height without harrow 5.8 m 19.02 ft Minimum temporary height reduction with sweeps 508 mm 20 in. Nominal inner wing width (between wing-fold pivots) 4.14 m 13.59 ft Weight With typical options: 18,790 kg 41,425 lb Spacing: 25.4 cm 10 in. Width: 18.6 m 61 ft
Spacing and width #4
Spacing and width #5
Spacing and width #6
Spacing and width #7
Spacing and width #8
Spacing and width #9
Spacing and width #10
Spacing and width #11
Spacing and width #12
Spacing and width #13
Spacing and width #14
Spacing and width #15
Spacing and width #16
Spacing and width #17
Spacing and width #18
Spacing and width #19

Seed Opener

Type #1	Spacing 25.4, 31.75 cm 10, 12.5 in. Dimensions 31.75 x 50.8 x 711 mm 1.25 x 2 x 28 in. Trip force 51 degree - 2.45 kN 550 lbf TruPosition™ - 51 degree (angle)
Type #2
Type #3
Penetration force
Underframe clearance	71.12 cm 28 in.

Fertilizer Opener

Type #1	Spacing 508 mm 20 in. Blade size 457 mm 18 in. Fertilizer compatibility Anhydrous gas, liquid, dry Rolling disk
Type #2

Mainframe

Centerframe width	4.19 m 13.75 ft
Cross members	10.16 x 10.16 cm 4 x 4 in.
End tubes	102 x 102 x 9.5 mm 4 x 4 x 3/8 in.
Hitch	Pin - 50.8 mm 2 in.
Hitch category	Category IV
Seeding tool depth control	Adjustable mechanical stop
Mainframe and wing flexibility	Diagonal flex

Fore-Aft Dimensions

Length	Hitch pin to rear of transport wheels 10.12 m 33.2 ft Lateral frame clearance, opener to opener 76.2 cm 30 in. Fore-aft frame clearance between ranks 73.66 cm 29 in. Front of front cross member to front of rear cross member (4 ranks) 1.47 m 4.83 ft

Press Wheels

Size	Steel On 10-in. spacing: 7.6 x 53.3, 10.2 x 55.9 cm (15.7, 16.3 kg) 3 x 21, 4 x 22 in. (34.7, 35.9 lb) Semi-pneumatic On 10-in. spacing: 7.6 x 53.3, 10.2 x 53.3, 14 x 53.3 cm (16.9, 19, 23.4 kg) 3 x 21, 4 x 21, 5.5 x 21 in. (37.2, 41.8, 51.6 lb) Split 36.8 kg 81.2 lb

Tires

Tire specifications	Tire link

Tractor Hydraulic Requirements

Minimum SCVs	3
Tractor hydraulic circuit requirements	One selective control for frame lift; one selective control for wing fold and transport wheels, one for SFP rockshaft control
Tractor hydraulic pressure requirement	41-ft: 138 bar/min 2000 psi/min 50-ft: 151.7 bar/min 2200 psi/min 61-ft: 172.4 bar/min 2500 psi/min