New 652R EFI QuikTrak™ Stand-On Mower, California Approved

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere652R EFI QuikTrak™ Stand-On Mower, California Approved

Add Model --Please Select-- Gravely 52 EFI (994142) V-Ride SVRII-52V-25CV-EFI

Add Model --Please Select-- Gravely 52 EFI (994142) V-Ride SVRII-52V-25CV-EFI

Engine Manufacturer/model	ECV740 EFI
Engine Power	Gross at 3,600 rpm: 20 hp 18.6 kW
Fuel tank capacity	5.6 U.S. gal. 21.2 L
Mower deck Size	52 in. 132 cm
Blade tip speed	18,900 fpm 5,761 m/min
Transmission	Hydrostatic
Speed range	0-9.5 mph 0-15.3 km/h
Drive wheels	20x10-8 Turf Master
Caster wheels	13x6.5-6
Warranty	24 months

Manufacturer/Model	ECV740 EFI
Power	Gross at 3,600 rpm: 20 hp 18.6 kW
Displacement	45.6 cu in. 747 cc
Cylinders	Two, V-twin
Crankcase capacity
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Forced air
Air cleaner	Heavy-duty canister with safety element

Fuel type	Gasoline, electronic fuel injection
Fuel consumption
Fuel tank capacity	5.6 U.S. gal. 21.2 L
Fuel tank switch/shut-off valve	Yes

Charge system	At 3,600 rpm, 20 amp
Battery voltage	12 V
Cold cranking amp
Hour meter	Digital
Operator presence starting system	Yes

Transmission	Hydrostatic
Hydraulic pumps	Hydro-Gear with fans, 0.73 cu in. 12 cc
Wheel motors	Hydro-Gear, 15 cu in. 246 cc
Travel speed	Speed range 0-9.5 mph 0-15.3 km/h Forward 0-9.5 mph 0-15.3 km/h Reverse 0-5.5 mph 0-8.9 km/h
Speed and direction control	Twin hand-controlled levers
Hydraulic capacity	With filter-wet, 2.9 qt 2.7 L Dry, 5 qt 4.7 L
Hydraulic oil cooler
Filter	Spin-on replaceable

Warranty	24 months

Drive wheels	20x10-8 Turf Master
Rear tires
Load rating	4 PR

Dynamic braking	Dual hand-controlled levers
Park brake	Tire engagement
Park brake actuation	Hand lever

Type	Electro-Magnetic with brake, 200 lb-ft 271 Nm
Drive	Dual B-section V-belt with Kevlar® cord

Size	52 in. 132 cm
Deck construction	Fabricated steel, floating mount system
Deck thickness	7 gauge 0.18 in. 4.6 mm
Discharge	Side
Height-of-cut range	Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm
Cutting width	52 in. 132 cm

Length
Thickness
Blade tip speed	18,900 fpm 5,761 m/min
Number	Three

Caster wheel type	No-flat semi-pneumatic with sealed bearings
Caster wheels	13x6.5-6
Front anti-scalp rollers	Center, left
Rear anti-scalp rollers

Length	66 in. 167.6 cm
Width	Deflector down, 66 in. 167.6 cm
Height	47 in. 119 cm
Weight	927 lb 420.5 kg

Date collected	07-Jun-2017