New 6080A PrecisionCut™ Fairway Mower

Specifications

Maximum rated horsepower	At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm
Drive pump	Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Ground pressure	69 kPa 10 psi
Throttle	Hand throttle
Operator display	TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed	0 to 12.8 km/h 0 to 8.0 mph
Cutting unit size	Quick Adjust QA5: 45.7 cm 18 in.
Total width of cut	203 cm 80 in.
Reel diameter	12.7 cm 5 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph

Type	Indirect Inject Diesel
Compliant emission regulation	United States and Canada Final Tier 4, EU Stage V
Horsepower	Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm
Cylinders	Three
Displacement	1.267 L 77.32 cu in.
Air cleaner	2-stage dry element
Fuel	Diesel Up to B20 compliant
Cooling system	Liquid centrifugal pump; forward machine location for optimum cooling

Traction drive
Drive pump	Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Cutting units drive
Hydraulic system capacity	37.8 L 10 U.S. gal.
Fuel tank capacity	45.4 L 12 U.S. gal.
Steering	Hydraulic power with double acting steering cylinder
Front drive tires	24x13-12 smooth
Steering tires	24x13-12 smooth
Ground pressure	69 kPa 10 psi
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS	Standard; meets ISO 21299 Standard

Cutting units lowered	1046 kg 2301 lb Canopy, FTCs and Power Brushes installed, full fuel

Throttle	Hand throttle
Forward/reverse	2-pedal electronic control of eHydro system
Mower lift	One-touch single handle
Parking brake	Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat	Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO	Electric Switch on Command Arm
Ignition
Work lights
Tilt steering	Left Foot operated for easy adjustment
Operator display	TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage	Cup holder; two-way radio; large operator storage located on left hand side of operator station

Height with ROPS	215.3 cm 84.8 in.
Length	305 cm 120.1 in.
Transport width	232 cm 91.3 in.
Mowing position width	233 cm 91.7 in.
Wheelbase
Ground speed	Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph

Number	Five
Size	Quick Adjust QA5: 45.7 cm 18 in.
Total width of cut	203 cm 80 in.
Height of cut	Construction 2.0 to 28.5 mm 0.078 to 1.125 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	Rollers Front and rear: 50.8 mm 2 in. Optional Front : 76.2 mm 3 in. At 2200 reel speed (engine high idle) - 11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph
Reel diameter	12.7 cm 5 in.
Bedknife adjustment
Backlapping

Operator ear full engine
Operator ear reduced engine rpm (2300 rpm)
Measuring standard	ISO 11201
Attachments installed	FTCs, reels engaged

Type	Two-year limited

Type	ANSI B71.4-2012