New 2550 PrecisionCut™ Triplex Mower

Specifications

Number of cylinders	3-cylinder
Displacement	993 cc 60.6 cu in.
Mowing speed	Adjustable mow stop: 0-7.1 km/h 0-4.4 mph
Traction drive	Hydrostatic, 2-pedal control
Mowing position width	157.5 cm 62 in.
Cutting unit size, in. (cm)	Quick Adjust QA5 floating: 55.9 cm 22 in.
Clip frequency	For 14 blade: 0.541 mm/km/h 0.034 in./mph With 11-blade reel: 0.689 mm/km/h 0.044 in./mph With 7-blade reel: 1.082 mm/km/h 0.069 in./mph
Height of cut	2.0-19.0 mm 0.078-0.75 in. with front roller: 51 mm 2 in. or 16-32 mm 0.625-1.25 in. with frotner roller: 76 mm 3 in.
Number of blades	7 or 11 blades
Operator ear	82 dBA

Type	Diesel model IDI Diesel
Horsepower	Diesel horsepower Per SAE J1995: 14.6 kW 19.6 hp *Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s web site for additional information.
Air cleaner	Semi-cyclone, dry-type, dual stage
Cooling	Oil filter Full-flow filter Engine oil capacity With filter: 2.2 L 2.3 U.S. qt Pressurized lubrication system Standard Number of cylinders 3-cylinder Displacement 993 cc 60.6 cu in. Liquid

Charging system	Flywheel, alternator
Alternator capacity	20 amp
Ignition
Battery type	BCI group 40 maintenance-free: 12 V
Starter	Electric (solenoid shift)

Wheels and tires	Front/rear 18x10.5-10, 2-ply, smooth (low compaction) 20x10-10, 2-ply or 4-ply, smooth or 20x10-10, 2-ply, turf
Brakes	Type Dual, 15.2 cm 6 in. Single-pedal, 2-wheel disc brakes
Mowing speed	Adjustable mow stop: 0-7.1 km/h 0-4.4 mph
Transport speed	0-12.9 km/h 0-8.0 mph
Reverse speed	0-4.8 km/h 0-3 mph
Ground clearance with catcher	10.2 cm 4 in.
Fuel tank capacity	In a single tank: 29.5 L 7.8 U.S. gal.
Muffler	Horizontal discharge below frame
Hydrostatic drive system capacity	28.8 L 7.6 U.S. gal.
Hydraulic reservoir capacity (only)	20.4 L 5.4 U.S. gal.
Ground drive, reel drive	Drive wheels Front Traction drive Hydrostatic, 2-pedal control Reel drive Hydraulic
Pump	3-section gear
Reel control valves	Electro-hydraulic, one valve reel on-off and one valve raise-lower
Filtration	10-micron

Steering	Hydrostatic, adjustable steering column
Reel drive and reel lift	Right-hand operated (optional foot-lift controls)
Throttle	Right hand
Park brake	Right foot
Hydrostatic speed control	Forward Right foot Reverse Right foot
Ignition	Key start and shutoff
Glow plug switch and indicator light	Automatic, on instrument panel

Engine oil pressure	LED Warning Light
Alternator	LED Warning Light
Hydraulic oil temperature	LED Warning Light
Engine coolant temperature	LED Warning Light
Hourmeter	Digital

Diagnostics
Safety Interlocks

Wheelbase	129.5 cm 51 in.
Tread width	101.5 cm 40 in.
Mowing position width	157.5 cm 62 in.
Turning radius, uncut circle	45.7 cm 18 in.
Weight (full fluids, no operator or fuel)	637.3 kg 1405 lb
Height	With ROPS: 194.6 cm 76.5 in.

Number	3 - offset design
Size, in. (cm)	Quick Adjust QA5 floating: 55.9 cm 22 in.
Backlapping	Standard on-board micro-backlapping and reel speed control
Clip frequency	For 14 blade: 0.541 mm/km/h 0.034 in./mph With 11-blade reel: 0.689 0.044 in./mph With 7-blade reel: 1.082 mm/km/h 0.069 in./mph
Front rollers	Optional smooth, grooved, or spiral: 5.1 cm 2 in.
Reel diameter	12.7 cm 5 in.
Bedknife adjustment	Bedknife-to-reel
Height of cut	2.0-19.0 mm 0.078-0.75 in. with front roller: 51 mm 2 in. or 16-32 mm 0.625-1.25 in. with frotner roller: 76 mm 3 in.
Number of blades	7 or 11 blades
Mower lift	(1) cylinder for front two units; (1) cylinder for rear unit
Reel speed	Adjustable

Number	ANSI B71.4-2004
ROPS	2-Post SAE J21294 Roll Over Protection Structure with seat belts meets ISO 21299 standards
Engine	EPA Tier 2, Interim Tier 4

Operator ear	82 dBA
Measuring standard	ISO 11201
Attachments installed	GTCs and Power Brushes, reels engaged

Date collected	31-Oct-2019